New KANGLUCHI heater? Get manuals & setup guides →
Product supportGlobal / EN

H1 fault code

E02

Power Supply Voltage Too Low

What to do

Check source: 12 V or 24 V DC, at least 15 A and rated power at least 150 W; minimum startup voltage 9 V for 12 V, 18 V for 24 V. Use a suitable adapter, battery pack, converter, or equivalent. Avoid makeshift battery-to-wiring clamps or fasteners. For harness extensions use at least 2 mm² conductors. If still inoperative, measure voltage and current at both source and heater-harness terminals.

From the H1 owner's manual