A1 fault code
E02
Supply voltage too low
What to do
- 1. Check power: 12V/24V, ≥15A, ≥150W; minimum starting voltage ≥9V for 12V or ≥18V for 24V.
- 2. A power adapter, battery pack, converter, or similar device is recommended: 12V/24V, ≥15A, ≥150W.
- 3. Never use a fastening device to connect battery and wires because poor contact may cause failure. When extending the harness, select wire with a diameter of ≥2mm ² to prevent voltage drop and low voltage/current malfunction. If it still does not operate normally after extension, measure voltage and current separately at the supply and heater-harness ends.
